What it means
FCE9 on a range means Maytag suspects the wi-fi power module or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Maytag oven FCE9 / Wi-Fi and registration
FCE9 on a range means Maytag suspects the wi-fi power module or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Also printed as FCE9
FCE9 on a range means Maytag suspects the wi-fi power module or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Turn the breaker off before you touch anything behind a panel.
FCE9 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Record FCE9 character by character and note the product type: range.

Cut power at the breaker for a minute, restore it, then check for FCE9.

Run the oven briefly after the reset and see whether FCE9 comes back.

See whether other devices on your home Wi-Fi work, and how strong the signal is where the range stands.
Keep the model number close and note when FCE9 appeared and what the range was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
FCE9 is printed against the wi-fi power module or the wiring. Maytag words it as a possible problem, not a finding.
Read the supporting manualTake the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if FCE9 stays away, the reset did its job.
Read the supporting manualFCE8 is a separate entry from FCE9 on the range page, with its own wording.
Read the supporting manualThe range cooks or runs as usual without Wi-Fi; only the connected features pause. If FCE9 keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13810 / PH 13810 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14340 / PH 14340 (wall oven)
Scope for FCE9: Maytag range, PH 13810, checked November 2026. Maytag lists no models on the FCE9 page.
The range page ties FCE9 to the wi-fi power module or the wiring without saying which has failed.
It sometimes does. Breaker off for a full minute, then on, then a minute of watching. If FCE9 returns, schedule a visit.
No. the wi-fi power module or the wiring are all candidates and the page gives no way to choose.
The model number, what FCE9 looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
The Maytag page for FCE8 on a range states “At the beginning of the registration process, the appliance type and model number needs to be selected.” Maytag prints no reset for it; if it keeps appearing, schedule a visit.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.