What it means
Maytag lists the user interface, the keypad, the control or the wiring for F2E1 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
Maytag oven F2E1 / User interface
Maytag lists the user interface, the keypad, the control or the wiring for F2E1 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
Also printed as F2E1
Maytag lists the user interface, the keypad, the control or the wiring for F2E1 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
Turn the breaker off before you touch anything behind a panel.
F2E1 returns, or the range behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Match the label on your appliance to the range list before you rely on the wording for F2E1.

With F2E1 on the range, leave the breaker off a whole minute before checking for the code again.

Once power is back, keep an eye on the oven for about a minute for F2E1.

Do not pry at the panel; the keypad connections are bench work.
Keep the model number close and note when F2E1 appeared and what the range was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it.
Read the definitionF2E1 is printed against the user interface, the keypad, the control or the wiring. Maytag words it as a possible problem, not a finding.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether F2E1 returns.
Read the supporting manualF2E0 and F2E1 name the same suspects in the range list; quote the code you actually see when booking.
Read the supporting manualThe range is fine to use only if you can start and stop it with certainty.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-04-28; PH 13766 / PH 13766 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14418 / PH 14418 (wall oven)
Facts for F2E1 are from the range table (PH 13766) of Maytag Product Help, checked November 2026; no model list is printed.
The range page ties F2E1 to the user interface, the keypad, the control or the wiring without saying which has failed.
Once F2E1 appears on a range, it is the page's first step and costs nothing. While the code shows on a range, a returning the code afterward means schedule us.
Maytag names the user interface, the keypad, the control or the wiring. Which one failed is for a technician with a meter to decide.
The model and serial numbers, the exact display for F2E1, and what the range was doing at the time.
Maytag codes, symptoms, parts and service
The Maytag range entry for F2E0 names the user interface, the keypad, the control or the wiring. Reset first, then call us in if the code keeps coming back.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it. F1-8 also names the keypad and its interface. The only home step printed is a one-minute breaker reset, followed by watching the oven.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.