Maytag dryer FCE1 / Reset only

Maytag dryer
error code FCE1

Dryer / display referenceFCE1

The Maytag page for FCE1 on a dryer states “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.

Also printed as FCE1

Last reviewed

Dryer / display referenceFCE1
Meaning
The Maytag page for FCE1 on a dryer states “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Who handles it
Reset, then book
Source
FC E1 - Error Code - Dryer - Product Help | Maytag

What Maytag dryer FCE1 means.

What it means

The Maytag page for FCE1 on a dryer states “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.

What you can safely check

Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.

When to call a technician

FCE1 returns, or the dryer behaves oddly around the code.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag dryer FCE1: Hand pressing the start button on a dryer control panel with a steel cycle knob beside a lit display reading 00
    Illustration. Follow your model’s instructions.
    Before you begin

    Stay safe

    Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.

  2. Dryers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Check what you see

    Check that your appliance is a dryer and copy FCE1 exactly as the display shows it.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Cut the power

    Power off for five full minutes, then on, and look for FCE1.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Retest briefly

    Run the dryer briefly after the reset and see whether FCE1 comes back.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Write down the exact words or symbols the dryer shows before you do anything.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Gather details

    Write down the model and serial numbers and the exact FCE1 wording before you call.

Does FCE1 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Heat and its safety limits.

Conceptual Dryer sectionHeaterThermostat / fuseDrumControl1234
  1. 1Heater
  2. 2Thermostat / fuse
  3. 3Drum
  4. 4Control

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What should a dryer owner take from FCE1?

FCE1 is covered by this wording on the dryer page: “Power unit down by turning off the circuit breaker(s) for 5 minutes.”

Read the supporting manual

Which first steps does Maytag give for FCE1?

Leave the dryer off power for five full minutes, switch it back on, and check the display for FCE1.

Read the supporting manual

What separates FCE1 from Loc?

Loc is a neighbor of FCE1, not a synonym. The reset may overlap; the text does not.

Read the supporting manual

Should the family keep using the dryer with FCE1 showing?

Use the dryer if it behaves normally; stop if there are odd noises, smells or heat.

Read the supporting manual

The manual behind the message.

Manufacturer document

FC E1 - Error Code - Dryer - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-05-27; PH 12821 / PH 12821 (dryer)

FCE1 comes from Maytag Product Help (PH 12821) for the dryer, read in November 2026; the FCE1 entry names no models.

Here to help

Good questions.
Clear answers.

Talk to our team
What does FCE1 mean for a dryer?

On the dryer page the line is “Power unit down by turning off the circuit breaker(s) for 5 minutes.” No further cause is given.

Should I power the dryer down for FCE1?

It may. Cut power for the full five minutes, restore it and watch. If FCE1 returns, schedule a visit.

Does FCE1 mean something has failed?

No part is named for FCE1; the page gives only the wording above.

What do you need to know about FCE1?

Tell us the model, the display wording and when FCE1 first showed up.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.