Maytag dryer F2E5 / User interface

Maytag dryer
error code F2E5

Dryer / display reference

On a dryer, the entry for F2E5 says “A 'F2E5' code in the display indicates there may be an issue with the user interface or the associated wiring.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.

Also printed as F2E5

Last reviewed

Dryer / display reference
Meaning
On a dryer, the entry for F2E5 says “A 'F2E5' code in the display indicates there may be an issue with the user interface or the associated wiring.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Who handles it
Reset, then book
Related codes
Source
F2E5 - Error Code - Dryer - Product Help | Maytag

What Maytag dryer F2E5 means.

What it means

On a dryer, the entry for F2E5 says “A 'F2E5' code in the display indicates there may be an issue with the user interface or the associated wiring.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.

What you can safely check

Power off before any panel comes off; lint and burnt smells mean stop and leave the dryer off.

When to call a technician

F2E5 repeats after the reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag dryer F2E5: Close view of a dryer console with a hand pressing a square button, three amber indicator lights and an orange segment display beside a steel knob.
    Illustration. Follow your model’s instructions.
    Before you begin

    Safety first

    Power off before any panel comes off; lint and burnt smells mean stop and leave the dryer off.

  2. Dryers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Check what you see

    Record F2E5 character by character and note the product type: dryer.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Cut the power

    Wait five minutes without power before you check for F2E5 again.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Watch afterward

    Run the dryer briefly after the reset and see whether F2E5 comes back.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Do not pry at the panel; the keypad connections are bench work.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Write it down

    Write down the model and serial numbers and the exact F2E5 wording before you call.

Does F2E5 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Heat and its safety limits.

Conceptual Dryer sectionHeaterThermostat / fuseDrumControl1234
  1. 2Thermostat / fuse
  2. 3Drum
  3. 4Control

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What should a dryer owner take from F2E5?

Maytag's dryer page gives F2E5 a single line: “A 'F2E5' code in the display indicates there may be an issue with the user interface or the associated wiring.” It adds nothing about cause.

Read the supporting manual

What do I try at home first for F2E5?

Cut power to the dryer for five minutes at the breaker or by cycling power as the page says, then restore it and see whether F2E5 comes back.

Read the supporting manual

Why do F2E5 and F2E4 sit side by side in Maytag's list?

The dryer list prints F2E4 next to F2E5, but with a different line. Look up the one on your display.

Read the supporting manual

Is the dryer fine to use with F2E5 on the display?

If the display jumps or keys misfire, leave the dryer off until a technician has looked. Never open a panel on the dryer yourself.

Read the supporting manual

The manual behind the message.

Manufacturer document

F2E5 - Error Code - Dryer - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-05-27; PH 12802 / PH 12802 (dryer)

Facts for F2E5 are from the dryer table (PH 12802) of Maytag Product Help, checked November 2026; no model list is printed.

Here to help

Good questions.
Clear answers.

Talk to our team
How should I read F2E5 on my dryer?

As long as F2E5 stays on the dryer, the help page states “A 'F2E5' code in the display indicates there may be an issue with the user interface or the associated wiring.” Nothing else is added.

How long must I cut power for F2E5?

Wait the whole five minutes, not less. If F2E5 persists, a technician should look.

Does Maytag tell me what to replace for F2E5?

Maytag names no part here. Read the message and follow the steps.

What should I tell the technician about F2E5?

Model and serial numbers plus a note of what happened when F2E5 appeared.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.