What it means
On a dryer, the entry for F3E3 says “Power unit down by turning off the circuit breaker(s) for one (1) minute.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Maytag dryer F3E3 / Reset only
On a dryer, the entry for F3E3 says “Power unit down by turning off the circuit breaker(s) for one (1) minute.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Also printed as F3E3
On a dryer, the entry for F3E3 says “Power unit down by turning off the circuit breaker(s) for one (1) minute.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Power off before any panel comes off; lint and burnt smells mean stop and leave the dryer off.
F3E3 returns, or the dryer behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Power off before any panel comes off; lint and burnt smells mean stop and leave the dryer off.

Match the label on your appliance to the dryer list before you rely on the wording for F3E3.

Leave the breaker off a whole minute before checking for F3E3 again.

Give the dryer a minute on screen after the reset; a returning F3E3 means schedule a visit.

Check your model manual for what F3E3 means before treating it as a breakdown.
Keep the model number close and note when F3E3 appeared and what the dryer was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Here is what Maytag prints for F3E3 on a dryer: “Power unit down by turning off the circuit breaker(s) for one (1) minute.”
Read the supporting manualTake the dryer off power at the breaker for a full minute. Put it back on and give it a minute of watching; if F3E3 stays away, the reset did its job.
Read the supporting manualThe dryer list prints F2E5 next to F3E3, but with a different line. Look up the one on your display.
Read the supporting manualUse the dryer if it behaves normally; stop if there are odd noises, smells or heat.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2026-08-19; PH 12807 / PH 12807 (dryer)
Scope for F3E3: Maytag dryer, PH 12807, checked November 2026. Maytag lists no models on the F3E3 page.
On the dryer page the line is “Power unit down by turning off the circuit breaker(s) for one (1) minute.” No further cause is given.
Yes, give it the whole minute. If F3E3 is still there afterward, schedule a visit.
Maytag names no part here. Read the message and follow the steps.
The model number, what F3E3 looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
On a dryer, the entry for F2E5 says “A 'F2E5' code in the display indicates there may be an issue with the user interface or the associated wiring.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.