Maytag dryer F26 / Reset only

Maytag dryer
error code F26

Dryer / display reference

Maytag's commercial-grade residential dryer page words F26 like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.

Also printed as F26

Last reviewed

Dryer / display reference
Meaning
Maytag's commercial-grade residential dryer page words F26 like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Who handles it
Reset, then book
Related codes
Source
F26 - Error Code - Commercial Dryer - Product Help | Maytag

What Maytag dryer F26 means.

What it means

Maytag's commercial-grade residential dryer page words F26 like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.

What you can safely check

Power off before any panel comes off; lint and burnt smells mean stop and leave the dryer off.

When to call a technician

F26 repeats after the reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag dryer F26: Hand pressing the start button on a dryer control panel with a steel cycle knob beside a lit display reading 00
    Illustration. Follow your model’s instructions.
    Before you begin

    Stay safe

    Power off before any panel comes off; lint and burnt smells mean stop and leave the dryer off.

  2. Dryers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Read the display

    Check that your appliance is a commercial-grade residential dryer and copy F26 exactly as the display shows it.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Cut the power

    Wait five minutes without power before you check for F26 again.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Check the display

    Run the dryer briefly after the reset and see whether F26 comes back.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Write down the exact words or symbols the commercial-grade residential dryer shows before you do anything.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Have this ready

    Note the model and the moment F26 showed up; both help us plan.

Does F26 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Heat and its safety limits.

Conceptual Dryer sectionHeaterThermostat / fuseDrumControl1234
  1. 1Heater
  2. 2Thermostat / fuse
  3. 3Drum
  4. 4Control

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

How does the Maytag commercial-grade residential dryer page explain F26?

F26 is covered by this wording on the commercial-grade residential dryer page: “Power unit down by turning off the circuit breaker(s) for 5 minutes.”

Read the supporting manual

How should I react the moment F26 appears?

Maytag asks for five minutes without power. Wait the full time, restore power, and note whether F26 reappears.

Read the supporting manual

How far apart are F26 and F25?

F25 is a separate entry from F26 on the commercial-grade residential dryer page, with its own wording.

Read the supporting manual

How careful should I be with the commercial-grade residential dryer while F26 is up?

Use the commercial-grade residential dryer if it behaves normally; stop if there are odd noises, smells or heat. If F26 keeps returning, stop and schedule a visit.

Read the supporting manual

The manual behind the message.

Manufacturer document

F26 - Error Code - Commercial Dryer - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-10-21; PH 11817 / PH 11817 (commercial-grade residential dryer)

Facts for F26 are from the commercial-grade residential dryer table (PH 11817) of Maytag Product Help, checked November 2026; no model list is printed.

Here to help

Good questions.
Clear answers.

Talk to our team
How should I read F26 on my commercial-grade residential dryer?

The commercial-grade residential dryer page reads “Power unit down by turning off the circuit breaker(s) for 5 minutes.” It prints nothing more about cause.

Should I power the commercial-grade residential dryer down for F26?

Try it first; five minutes is the printed time. A returning F26 means schedule us.

Is a specific part blamed for F26?

Nothing about replacing parts is printed for F26.

What should I tell the technician about F26?

The model number, what F26 looked like, and whether the reset changed anything.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.