What it means
F28 on a Maytag commercial-grade residential dryer is explained as “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Maytag dryer F28 / Reset only
F28 on a Maytag commercial-grade residential dryer is explained as “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Also printed as F28
F28 on a Maytag commercial-grade residential dryer is explained as “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.
F28 returns, or the commercial-grade residential dryer behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.

Match the label on your appliance to the commercial-grade residential dryer list before you rely on the wording for F28.

Wait five minutes without power before you check for F28 again.

Give the dryer a minute on screen after the reset; a returning F28 means schedule a visit.

Write down the exact words or symbols the commercial-grade residential dryer shows before you do anything.
Write down the model and serial numbers and the exact F28 wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
F28 is covered by this wording on the commercial-grade residential dryer page: “Power unit down by turning off the circuit breaker(s) for 5 minutes.”
Read the supporting manualLeave the dryer off power for five full minutes, switch it back on, and check the display for F28.
Read the supporting manualF26 is a separate entry from F28 on the commercial-grade residential dryer page, with its own wording.
Read the supporting manualUse the commercial-grade residential dryer if it behaves normally; stop if there are odd noises, smells or heat. If F28 keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-10-21; PH 11818 / PH 11818 (commercial-grade residential dryer)
Facts for F28 are from the commercial-grade residential dryer table (PH 11818) of Maytag Product Help, checked November 2026; no model list is printed.
Maytag's wording is “Power unit down by turning off the circuit breaker(s) for 5 minutes.” That is the whole entry.
Yes, run it as printed and schedule a visit if F28 stays.
Maytag names no part here. Read the message and follow the steps.
The model number, what F28 looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
Maytag's commercial-grade residential dryer page words F26 like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.