What it means
The Maytag page for F24 on a commercial-grade residential dryer states “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Maytag dryer F24 / Reset only
The Maytag page for F24 on a commercial-grade residential dryer states “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Also printed as F24
The Maytag page for F24 on a commercial-grade residential dryer states “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Power off before any panel comes off; lint and burnt smells mean stop and leave the dryer off.
F24 returns, or the commercial-grade residential dryer behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Power off before any panel comes off; lint and burnt smells mean stop and leave the dryer off.

Check that your appliance is a commercial-grade residential dryer and copy F24 exactly as the display shows it.

Wait five minutes without power before you check for F24 again.

Give the dryer a minute on screen after the reset; a returning F24 means schedule a visit.

Write down the exact words or symbols the commercial-grade residential dryer shows before you do anything.
Note the model and the moment F24 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Maytag's commercial-grade residential dryer page gives F24 a single line: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” It adds nothing about cause.
Read the supporting manualMaytag asks for five minutes without power. Wait the full time, restore power, and note whether F24 reappears.
Read the supporting manualF23 is a neighbor of F24, not a synonym. The reset may overlap; the text does not.
Read the supporting manualUse the commercial-grade residential dryer if it behaves normally; stop if there are odd noises, smells or heat. Never open a panel on the commercial-grade residential dryer yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-10-21; PH 11815 / PH 11815 (commercial-grade residential dryer)
F24 comes from Maytag Product Help (PH 11815) for the commercial-grade residential dryer, read in November 2026; the F24 entry names no models.
The help page states “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Nothing else is added.
Wait the whole five minutes, not less. If F24 persists, a technician should look.
No part is named for F24; the page gives only the wording above.
The model and serial numbers, the exact display for F24, and what the commercial-grade residential dryer was doing at the time.
Maytag codes, symptoms, parts and service
On a commercial-grade residential dryer, the entry for F23 says “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.