Maytag dishwasher Glowing Red / Display and signals

Maytag dishwasher
error code Glowing Red

Dishwasher / display referenceGlowing Red

Glowing Red on a Maytag dishwasher is explained as “The Sani Rinse indicator glows at the end of the cycle if the Sani Rinse option is successfully completed.” Cut the power for 30 seconds, then restore it; schedule a visit if the code is still there.

Also printed as Glowing Red

Last reviewed

Dishwasher / display referenceGlowing Red
Meaning
Glowing Red on a Maytag dishwasher is explained as “The Sani Rinse indicator glows at the end of the cycle if the Sani Rinse option is successfully completed.” Cut the power for 30 seconds, then restore it; schedule a visit if the code is still there.
Who handles it
Information only
Source
Glowing Red - Dishwasher - Product Help | Maytag

What Maytag dishwasher Glowing Red means.

What it means

Glowing Red on a Maytag dishwasher is explained as “The Sani Rinse indicator glows at the end of the cycle if the Sani Rinse option is successfully completed.” Cut the power for 30 seconds, then restore it; schedule a visit if the code is still there.

What you can safely check

Switch off power and the water supply before opening anything, and wipe up spills so nobody slips.

When to call a technician

Glowing Red returns, or the dishwasher behaves oddly around the code.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag dishwasher Glowing Red: Top edge of a stainless dishwasher door cracked open, with a dark control strip showing two blue dashes and small blue indicator lights.
    Illustration. Follow your model’s instructions.
    Before you begin

    Stay safe

    Switch off power and the water supply before opening anything, and wipe up spills so nobody slips.

  2. Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Record the code

    Match the label on your appliance to the dishwasher list before you rely on the wording for Glowing Red.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Run the reset

    Wait a full thirty seconds without power before you check for Glowing Red again.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Watch afterward

    Run the dishwasher briefly after the reset and see whether Glowing Red comes back.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Make sure the door of the dishwasher latches and nothing blocks it.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Have this ready

    Keep the model number close and note when Glowing Red appeared and what the dishwasher was doing.

Does Glowing Red keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The control and its wiring.

Conceptual dishwasher sectionKeypadControl boardMotor wiringHeater wiring1234
  1. 1Keypad
  2. 2Control board
  3. 3Motor wiring
  4. 4Heater wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What is Maytag saying with Glowing Red on your dishwasher?

The dishwasher entry for Glowing Red reads “The Sani Rinse indicator glows at the end of the cycle if the Sani Rinse option is successfully completed.” That is the whole explanation Maytag prints.

Read the supporting manual

How should I react the moment Glowing Red appears?

Cut power to the dishwasher for 30 seconds, then restore it and check whether Glowing Red returns.

Read the supporting manual

Why do Glowing Red and Front Status Lights Not Illuminated sit side by side in Maytag's list?

Front Status Lights Not Illuminated is a neighbor of Glowing Red, not a synonym. The reset may overlap; the text does not.

Read the supporting manual

How careful should I be with the dishwasher while Glowing Red is up?

If the tub fills or leaks, shut off the water supply and call us.

Read the supporting manual

The manual behind the message.

Manufacturer document

Glowing Red - Dishwasher - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2026-06-08; PH 15074 / PH 15074 (dishwasher)

Glowing Red comes from Maytag Product Help (PH 15074) for the dishwasher, read in November 2026; the Glowing Red entry names no models.

Here to help

Good questions.
Clear answers.

Talk to our team
What is Glowing Red on a Maytag dishwasher?

Maytag's wording is “The Sani Rinse indicator glows at the end of the cycle if the Sani Rinse option is successfully completed.” That is the whole entry.

Can a quick power-off reset fix Glowing Red?

Try it first; thirty seconds is the printed time. A returning Glowing Red means schedule us.

Does Glowing Red mean something has failed?

Maytag names no part here. Read the message and follow the steps.

What should I have ready when I schedule for Glowing Red?

Tell us the model, the display wording and when Glowing Red first showed up.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.