What it means
Maytag's dryer page words F9E2 like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Maytag dryer F9E2 / Reset only
Maytag's dryer page words F9E2 like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Also printed as F9E2
Maytag's dryer page words F9E2 like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Power off before any panel comes off; lint and burnt smells mean stop and leave the dryer off.
F9E2 returns, or the dryer behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Power off before any panel comes off; lint and burnt smells mean stop and leave the dryer off.

Check that your appliance is a dryer and copy F9E2 exactly as the display shows it.

Wait five minutes without power before you check for F9E2 again.

Give the dryer a minute on screen after the reset; a returning F9E2 means schedule a visit.

Note when F9E2 appears: at start, mid-cycle or after a power cut.
Note the model and the moment F9E2 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Maytag's dryer page gives F9E2 a single line: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” It adds nothing about cause.
Read the supporting manualMaytag asks for five minutes without power. Wait the full time, restore power, and note whether F9E2 reappears.
Read the supporting manualF7E1 is a neighbor of F9E2, not a synonym. The reset may overlap; the text does not.
Read the supporting manualUse the dryer if it behaves normally; stop if there are odd noises, smells or heat. Never open a panel on the dryer yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-05-27; PH 12820 / PH 12820 (dryer)
F9E2 comes from Maytag Product Help (PH 12820) for the dryer, read in November 2026; the F9E2 entry names no models.
Maytag's wording is “Power unit down by turning off the circuit breaker(s) for 5 minutes.” That is the whole entry.
Yes, run it as printed and schedule a visit if F9E2 stays.
Nothing about replacing parts is printed for F9E2.
The model and serial numbers, the exact display for F9E2, and what the dryer was doing at the time.
Maytag codes, symptoms, parts and service
The Maytag page for F7E1 on a dryer states “F7 E1: Motor System.” Try the one-minute breaker reset, and schedule a visit if the code returns.
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.