What it means
The Maytag page for F6E2 on a dryer states “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Maytag dryer F6E2 / Reset only
The Maytag page for F6E2 on a dryer states “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Also printed as F6E2
The Maytag page for F6E2 on a dryer states “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.
F6E2 returns, or the dryer behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.

Record F6E2 character by character and note the product type: dryer.

Power off for five full minutes, then on, and look for F6E2.

Once power is back, keep an eye on the dryer for about a minute for F6E2.

Note when F6E2 appears: at start, mid-cycle or after a power cut.
Write down the model and serial numbers and the exact F6E2 wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
F6E2 is covered by this wording on the dryer page: “Power unit down by turning off the circuit breaker(s) for 5 minutes.”
Read the supporting manualMaytag asks for five minutes without power. Wait the full time, restore power, and note whether F6E2 reappears.
Read the supporting manualF6E3 is a neighbor of F6E2, not a synonym. The reset may overlap; the text does not.
Read the supporting manualWhether the dryer is safe depends on how it behaves, not the message alone. If F6E2 keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-05-27; PH 12816 / PH 12816 (dryer)
Facts for F6E2 are from the dryer table (PH 12816) of Maytag Product Help, checked November 2026; no model list is printed.
The help page states “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Nothing else is added.
It may. Cut power for the full five minutes, restore it and watch. If F6E2 returns, schedule a visit.
No part is named for F6E2; the page gives only the wording above.
The model and serial numbers, the exact display for F6E2, and what the dryer was doing at the time.
Maytag codes, symptoms, parts and service
On a dryer, the entry for F6E3 says “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.