Inside the appliance
Freezer temperature alarm. In plain English.
A Maytag freezer with the alarm option buzzes when the cabinet climbs ten degrees Fahrenheit or more past the temperature you picked. Product Help describes a three-position slide under the temperature control: test, on, off. Certain models also give a continuous tone with a blinking red light at 19°F.

Where it fits.
Freezer temperature alarm in the appliance
Product Help puts the slide switch just under the temperature control.
This image is an example of the component type. It will not tell you which replacement is right for your model.
How you can tell this system is asking for attention.
Freezer temperature alarm trouble can show up along with weaker performance or a code that keeps coming back. It takes testing to say whether this component is the reason.

Maytag upright freezer door not sealing or not cooling
When a Maytag upright freezer door will not seal and the freezer struggles to cool, it is often off level, has shelves or baskets out of position, a package or shipping material blocking the door, or a spot too hot or too cold. Sort those out, and book a technician if air still gets in.

Maytag chest freezer red light or alarm
On a Maytag chest freezer, a red indicator means the temperature is not low enough, and the alarm sounds when it reaches 10°F (-12°C) or more above your setting. The usual causes are a freezer not running, a big load of unfrozen food, a hot spot, or a lid left open or opened often.
Owner care, within the model instructions.
Power the machine down and pull the plug ahead of any check you make yourself. Beware of pooled water and sharp bits of debris. Never handle a wet plug or electrical parts, take off a service panel or go beyond what your model’s owner guide permits.
- 1
Run the test
Slide the switch right to sound a test buzz, and left to arm the alarm.
- 2
Mind the middle position
Centered, the alarm is switched off, so silence can simply mean it was disarmed.
- 3
Quiet the over-temperature tone
Where the model has that alert, one press of TEMP SETTING stops the tone.
- 4
Think about what warmed it
Fresh unfrozen groceries, a lid left up, or a nearby heat source can all push the cabinet warmer.
- 5
Match your model
Alarm style varies, so confirm yours in the Owner's Manual.
Cleaning or replacement?
Leave internal testing to a technician.
The buzz keeps coming after the lid is down and the load has settled.
The test works yet the cabinet will not get cold.
Packages are going soft.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Freezer temperature alarm advice. Read the manual for your own model.
- Using the Alarm Feature - Product Help | Maytag
- Alarm Sound - Chest Freezer - Product Help | Maytag
- Alarm Sound - Convertible Chest Freezer - Product Help | Maytag
Follow the guide for your own model, and see how we research these pages.
What sets off a Maytag freezer alarm?
Cabinet air at least ten degrees Fahrenheit warmer than your chosen setting, on models with the alarm.
How do I check the alarm works?
Move the three-position switch to the right for a test buzz. Left arms it; center turns it off.
What is the 19°F alert?
On some models a continuous tone and a blinking red light come on once the freezer reaches 19°F.
Can I mute it?
Where the over-temperature alert exists, press TEMP SETTING once.
Maytag codes, symptoms, parts and service
From the message to what you do next.
Maytag upright freezer door not sealing or not cooling
When a Maytag upright freezer door will not seal and the freezer struggles to cool, it is often off level, has shelves or baskets out of position, a package or shipping material blocking the door, or a spot too hot or too cold. Sort those out, and book a technician if air still gets in.
Freezer repair
Book a diagnostic for your model, done at the machine.
Find your metro
Office details, and the entry information to pass along.

