What it means
Maytag's commercial-grade residential dryer page words 0g like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Maytag dryer 0g / Reset only
Maytag's commercial-grade residential dryer page words 0g like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Also printed as 0g
Maytag's commercial-grade residential dryer page words 0g like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.
0g returns, or the commercial-grade residential dryer behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.

Check that your appliance is a commercial-grade residential dryer and copy 0g exactly as the display shows it.

Power off for five full minutes, then on, and look for 0g.

Run the dryer briefly after the reset and see whether 0g comes back.

Write down the exact words or symbols the commercial-grade residential dryer shows before you do anything.
Write down the model and serial numbers and the exact 0g wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Maytag's commercial-grade residential dryer page gives 0g a single line: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” It adds nothing about cause.
Read the supporting manualLeave the dryer off power for five full minutes, switch it back on, and check the display for 0g.
Read the supporting manual0E is a neighbor of 0g, not a synonym. The reset may overlap; the text does not.
Read the supporting manualWhen in doubt, switch the commercial-grade residential dryer off.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-10-21; PH 11800 / PH 11800 (commercial-grade residential dryer)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2023-12-07; PH 12833 / PH 12833 (dryer)
Facts for 0g are from the commercial-grade residential dryer table (PH 11800) of Maytag Product Help, checked November 2026; no model list is printed.
The commercial-grade residential dryer page reads “Power unit down by turning off the circuit breaker(s) for 5 minutes.” It prints nothing more about cause.
Yes, run it as printed and schedule a visit if 0g stays.
Maytag names no part here. Read the message and follow the steps.
Model and serial numbers plus a note of what happened when 0g appeared.
Maytag codes, symptoms, parts and service
Maytag's commercial-grade residential dryer page words 0E like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.